What are the tips for applying PVC self adhesive wallpaper?
1. Wipe off the dust, oil stains and other pollutants on the surface of the pasting position and let it dry (the pasting surface should be flat and not wet).
2. Before pasting, hold the sticker to indicate the position, and then measure and cut.
3. Carefully apply the wallpaper from top to bottom, and gradually remove the backing paper on the back. While removing the backing paper, use a soft cloth or towel to gently smooth the wallpaper from the center to both sides, and remove all bubbles to ensure a smooth effect.
4. If there are bubbles after pasting, poke it with a needle to get rid of the air.
How to stick it to an uneven place
If it is self adhesive wallpaper, you can stick it to the wall. If the wall is uneven, first apply plaster, and then use wallpaper glue. If it is the latter, you can't stick it to the wall. If you really want to stick it to the wall, you can only stick it on a piece of wood, and then hang it on the wall. If it is smooth, you can stick it directly. If it is wood, you can grind it with sandpaper before sticking it. It is stronger and flat first.
How to deal with cement walls
Generally, you can scrape the wall with putty twice, then polish it, and then apply a base film. There are good and cheap base films. Putty paste is generally about 17 yuan per bag. You can scrape ten square meters (twice) depending on the flatness of your wall.
You must scrape the putty once, so that the wall surface can be smooth, but you don’t need to apply latex paint. In addition, cement walls cannot be directly applied with wallpaper. It is not firmly adhered. To put it bluntly, the base film plays a role in firmly sticking. Generally, the base film is used. But if it is that kind of self-adhesive wallpaper, the problem is not big. It is not that the cement wall cannot be pasted with wallpaper, but that the cement wall is not flat enough. You must first scrape a layer of 801 plus white cement, and then scrape one or two layers of talcum powder. Sandpaper polishing is used to confirm that the wall is flat.
